If you are going to have a new furnace installed, then you should know that it is a big job. If you plan to fit your new heater on your own, you will want to reconsider. You should ensure your installation job is done correctly, so only let trusted HVAC experts do the job. You do not want to waste time, money and energy trying to do this complex installment by yourself.

Proper furnace installation should be of the highest importance to you if you want to make sure your new equipment performs as efficiently as it should. Attempting to do it yourself or hiring someone inexperienced will only lead to disaster. It should meet its offer labelled efficiency ratings and deliver years of warmth.

Choosing the Right HVAC Contractor
Authorized and qualified HVAC professionals should always perform furnace fittings. Your furnace is a complicated mechanical system, which is why it is never a good idea to install it by yourself. Working with a qualified contractor keeps your investment protected. They will provide you with expert furnace installation assistance so that your new heating system performs as efficiently as it should.

Knowing the Cost of Furnace Installation
When you get a quote for furnace installation services from a licensed HVAC contractor, it should include the total cost of having it installed and the actual cost of the furnace. The cumulative price may differ due to various factors such as features, fuel type, or complications that have to do with the installation as a whole. Some cases require further work for the contractor such as fitting custom ductwork.

Preparing for the Actual Installation
While industrial building owners should not try to install a furnace on their own, there are still some things they can do to prepare for their furnace installation. They should find a quality furnace installer, investigate equipment options, and get their office ready for the installment.

Common Concerns for Furnace Installation
Furnace installation is something that business owners will likely do a few times over the years. How often will depend on the length of time they used their heater as well as other factors. If you have never had to have a furnace installed in your office or industrial building, do not hesitate to call HECO today and ask us about any concerns you may have.

Get the quality furnace installation help you need by picking our team of licensed HVAC professionals. Call us today to book an appointment.

Boilers can account for quite a bit of your energy consumption, but there are several ways you can increase its efficiency. By implementing energy-efficient strategies, you could save hundreds of dollars off of your boiler through no-cost and low-cost options. Consider the following ways to increase your boiler’s efficiency:

Maintenance
One of the most cost-effective means to have your equipment operating efficiently is through routine boiler maintenance. A thorough maintenance program can enhance efficiency, slow deterioration, reduce operating expenses and ultimately maintain the reliability of your boiler. As well as having a standard maintenance regime executed by an experienced boiler technician, there are several inspections you can do yourself like looking for changes in appearance and taking temperature readings.

Excess Air
Optimal performance of a boiler requires a certain amount of excess air to make sure combustion is complete. If the unit runs with too much air, it can reduce the boiler’s efficiency by heating and discarding this “cushion” air. In contrast, running the boiler without enough air can cause sooting on the fireside, air pollution, decreased efficiency and potentially explosive gases. By monitoring the oxygen and the carbon dioxide content, you can optimize the air cushion and fine tune your boiler for maximum efficiency. Fixed or portable combustion efficiency tests are available and can be used to improve combustion air quality.

Turbulators
Installing a turbulator can be an efficient way to reinforce efficiency if you have a firetube boiler. A turbulator is a device that is put inside the parts of the boiler responsible for transferring heat. This device boosts heat transfer efficiency by building a turbulent flow through the boiler’s passes. Turbulators are one of the most cost-effective upgrades to improve the efficiency of older firetube boilers.

Burners
Over time, the burners on the boiler start to lose power and efficiency as a result. Once this happens, the burners should either be retrofitted or replaced. Regardless of the type of fuel you use or the kind of boiler you have, there are many burner options you can consider as a replacement. Even if you are cannot purchase new boiler burners just yet, retrofitting your burner can offer notable savings for a fraction of the cost.

Insulation
Large industrial boilers have broad surface areas that are exceptionally vulnerable to the loss of heat, particularly when poorly insulated. You may be able to reinforce the performance of your boiler with insulation. The primary type of industrial insulation boilers uses a refractory substance used to line the boiler. If you decide to restore this material, make sure to carry out a full structural inquiry to define the amount of weight the boiler can sufficiently support.

In many cases, it is more cost effective to upgrade to a new boiler system. At HECO, we offer a wide range of equipment for a variety of industries. Regardless of your needs, we can help. We also provide industrial refrigeration services and contractors. Contact HECO today to schedule a consultation.

Although your furnace air filter might seem like an insignificant part of your commercial HVAC system, this little component is extremely important to protect and maintain good indoor air quality for your commercial property. A commercial building such as a factory, office, school, hospital, etc. is used by many people, and it is important that it is kept well maintained and the air filters used are cleaned and replaced at proper times. Since a proper air filter ensures good quality indoor air, employee health, and better worker productivity through proper filtration, when it comes to replacing the air filters for your HVAC system, there are many important things you need to consider.

Air Filter Costs and Operating Conditions
Thinking of upgrading your air filter? The cost may be the first thing you will think about. Before going ahead with the purchase, it is imperative to think about the life cycle cost of the commercial air filter rather than just the cost of the filter itself. Typically, the filter cost should encompass:

• Cost of the material and shipping
• Operating cost of the filter
• Replacement cost
• Cost of disposal if any

For high-efficiency filters, although the material cost will be high, it is important to regard that due to some of their features, such as greater resistance to pressure drop, you will also have some incidental extra costs such as fan replacements. Having said that, it will still be an optimal change overall since your HVAC improvements will lower your long-term costs. They will provide cleaner air throughout the facility and maintain all the components optimally. When purchasing an air filter, remember to include the building’s air pressure.

Particulate Air Filtration
Another thing that needs to be evaluated is the type and level of contamination in your indoor air. You will need to select an air filtration system based on the identification of contaminants using ANSI/ASHRAE Standard 52.2-1999. Be sure to select a filter with the adequate Minimum Efficiency Reporting Value for the best results. It is imperative that the filter selection is based on the ANSI/ASHRAE standard so that contaminants can be eliminated as per particle size.

New Technologies
Higher efficiency filtration systems often give rise to pressure drops. With improving technology, there are several air filtration products which are designed to cause higher filtration efficiency without significant or any increase in pressure drop. This helps to reduce airflow resistance. For instance, consider the mini-pleat V cell filters. They offer four times the media in the same 24 X 24 X 12 filter pack. A 1-inch min-pleat panel in a V-style filter pack will provide more filter surface area, decreasing the air flow resistance.

Air filter bypass is one of the most common problems observed in HVAC filtration systems. It is imperative to know what kind of filter needs to be installed and how. Thankfully, HECO, a reputed company and contractor for industrial refrigeration, can help you to understand all the nitty-gritty for choosing the right HVAC air filter for commercial purposes.

Recent Posts

• Top 4 Reasons To Invest In A Blast Freezer/Chiller
• How To Hire The Best HVAC Contractors
• Things You Should Know About Industrial Refrigeration System Installation
• Tips for Reducing Business Energy Costs
• Oil Migration through a Refrigeration System